74.9574.951
OEM New Chevrolet Smart Key Remote HYQ4AA 13508766, 13529665, 13585723Programming: Onboard
Extended warranty is available on the checkout page. Remote For Chevrolet: This remote features 3 buttons: Lock, Unlock and Panic. This remote sends it's signals on a frequency of 315Mhz. This remote will work for your vehicle if your vehicle is equipped with factory keyless entry. Programming with Recognized Transmitters A new ...
Key-N-Fob MfgOEM New Chevrolet Smart Key Remote HYQ4AA 13508766

OEM New Chevrolet Smart Key Remote HYQ4AA 13508766, 13529665, 13585723

Programming: Onboard

$74.95

Select Your Vehicle
Specifications
Item Specifics
Product Type
Smart Key Remote
Product Character
Vehicle Specific
Buttons
3
Frequency
315 MHz
Blade Type
High Security
Remote Programming
By Transponder
Transponder Programming
Onboard
RF Transmission
1Way
Condition
New
Warranty
1 month
Description

Extended warranty is available on the checkout page.


Remote For Chevrolet:

This remote features 3 buttons: Lock, Unlock and Panic. This remote sends it's signals on a frequency of 315Mhz. This remote will work for your vehicle if your vehicle is equipped with factory keyless entry.


Programming with Recognized Transmitters

A new transmitter can be programmed to the vehicle when there are two recognized transmitters.
To program, the vehicle must be off and all of the transmitters, both currently recognized and new, must be with you.

1. Remove the key from the RKE transmitter.
2. Remove the key lock cylinder cap on the driver door handle. Place the two recognized transmitters in the cupholder.
3. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door handle and turn the key, counterclockwise, to the unlock position five times within 10 seconds. The DIC displays READY FOR REMOTE #3, 4, 5, ETC.
4. Place the new transmitter into the cupholder.
5. Press ENGINE START/STOP. When the transmitter is learned the DIC display will show that it is ready to program the next transmitter.
6. Remove the transmitter from the cupholder and press K or Q on the transmitter.

To program additional transmitters, repeat Steps 3-5. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.

7. Put the key back into the transmitter.

 

Programming without Recognized Transmitters

If two currently recognized transmitters are not available, follow this procedure to program up to eight transmitters. This feature is not available in Canada. This procedure will take approximately 30 minutes to complete. The vehicle must be off and all of the
transmitters you wish to program must be with you.


1. Remove the key from the RKE transmitter.
2. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door handle and turn the key, counterclockwise, to the unlock position five times within 10 seconds. The DIC displays REMOTE LEARN PENDING, PLEASE WAIT.
3. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN and then press ENGINE START/STOP. The DIC display will again show REMOTE LEARN PENDING, PLEASE WAIT.
4. Repeat Step 2 two additional times. After the third time all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps. The DIC display should now show READY FOR REMOTE # 1.
5. Place the new transmitter into the cupholder.
6. Press ENGINE START/STOP. When the transmitter is learned the DIC display will show that it is ready to program the next transmitter.
7. Remove the transmitter from the cupholder and press K or Q on the transmitter.

To program additional transmitters, repeat Steps 4-6. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.

8. Put the key back into the transmitter.


The following vehicles can use this remote when equipped with the factory keyless entry system:

Chevrolet Equinox (2018-2020), Chevrolet Spark (2016-2020)

Accessories
  • Battery Included
  • Free Tech Support
  • Guaranteed To Work
  • Tested Before Shipping
Return Policy

OVERVIEW

At RAK we make returns as easy as possible. Our mission is to provide you with the best products and the best service in the industry. We understand that sometimes, customers change their minds about products that they order or simply do not need them anymore. We also know that customers are cautious about Return Policies since they are often tricky and misleading. Our goal is to make the return or exchange process trustworthy and as simple as 1-2-3.

RETURN POLICY

If for any reason you are not completely satisfied with your purchase, you may return the item within 30 days of delivery of your order. The following rules apply:

Products must be in the same condition we sent it in. If the condition isn't in the same condition that we sent to you, then the refund amount will be less due to our cost to restore or refurbish the item. If it's not possible to restore or refurbish then the refund would be the value we could sell it for in the condition it is now in minus 20%. If you place a "Special Order" with us then there would be a 40% restocking fee.

Shipping Fees are non-refundable.

All returns must be made by signing in, going to MY ACCOUNT, clicking order history, finding the order, click Return this item.There are few non-returnable products & services that may be offered on our website. It will indicate clearly in the product description if a different return policy applies.

Order cancellations can only be requested prior to shipment.

RETURN PROCEDURE

To return a product, you must first request a Return Merchandise Authorization (RMA) that is located in the MY ACCOUNT section next to each order item that you want to return. Once you've selected the items to return and the reason, you will be given return instructions.

EXCHANGE PROCEDURE

There are 2 ways you can go about exchanging a product:

Option 1 (Slower) - Use the standard return procedure to request an RMA for the part you need exchanged. In your request please specify the exact item(s) you would like to exchange to. Upon receipt of your returned product we will process an exchange and ship the new part. If there is a difference in the price, you will be either refunded or charged the difference.

Option 2 (Faster) - Order the new part over the phone and request to include a prepaid label to send back the first purchase for refund.

DEFECTIVE, DAMAGED, OR INCORRECT PRODUCTS

We all know that accidents happen sometimes. If your product(s) will arrive defective, damaged, or simply incorrect, please contact our customer service department as soon as possible. Please do not attempt to use or install the part! We will send you a replacement part and provide you with a prepaid return label to return the defective part. Product(s) must be returned to us within 30 days. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier.

ORDER CANCELLATIONS

When you request a cancellation of an order or a part it may take up to 24 business hours to process your cancellation claim. This process may involve voiding orders in computer systems, removing items from backorder logs, having operations personnel pull items from production schedules and sometimes stopping orders at the shipping dock. Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of your cancellation.

REFUNDS & CREDITS

After we accept your return, you will be issued a refund via the same payment method as you had originally used to place the order. The refund amount will be composed of the original purchase price minus shipping charges. You will be sent an email confirming receipt of the return and your credit. Please allow an additional 5-7 days for the credit to appear on your account.

Battery Replacement

Remote Batteries

Bring your old key fob back to life.

But CR2032 Battery

To replace the battery:

  1. Separate the two halves of the transmitter by inserting a flat tool into the recess of the transmitter.
  2. Remove the battery with a small tool by pushing it toward the top of the transmitter.
  3. Insert a new battery positive side up, pushing it down until it is held in place. Use CR2032 or quivalent battery.
  4. Snap the battery cover back on to the transmitter.

Note: Replacement of the battery will not cause the remote transmitter to become deprogrammed from your vehicle. The remote transmitter should operate normally after battery replacement.

Customer Reviews
Share your thoughts with other customers
Login to leave a review
Questions & Answers
Be first to ask a question

Get in Touch
  • Chipkeys
    2302 Ave U #79
    Brooklyn, NY 11229
  • 386.586.3650
  • CONTACT US
Get the Latest

SIGN UP TO HEAR ABOUT OUR NEW PRODUCTS AND SALES.

TEASoftware