19.9519.951
Venture Silhouette Montana Factory Keyless Remote L2C0007T 5 ButtonsTested Remote, Guaranteed To Work
Your vehicle is onboard programmable.  This means you can program the vehicle to accept the remote yourself.  Easy instructions are included.  We provide free phone tech support to help you program it if needed.   This remote works on the vehicles listed when they are equipped two power sliding doors.   ...
GM Genuine Parts4.52L2C0007T 5B Keyfob

Venture Silhouette Montana Factory Keyless Remote L2C0007T 5 Buttons

Tested Remote, Guaranteed To Work

$19.95
Select Your Vehicle
Specifications
Item Specifics
Product Type
Regular Remote
Buttons
5
LED
None
Frequency
315 MHz
Remote Programming
Onboard
RF Transmission
1Way
Description

Your vehicle is onboard programmable.  This means you can program the vehicle to accept the remote yourself.  Easy instructions are included.  We provide free phone tech support to help you program it if needed.

 

This remote works on the vehicles listed when they are equipped two power sliding doors.

 


Remote For Chevrolet Oldsmobile Pontiac:

 

The remote has an FCC ID of L2C0007T.  The part number on your remote is 10335582-88 or 9364556-4575.  It has 5 Buttons - LOCK, UNLOCK, LEFT POWER SLIDING DOOR, RIGHT POWER SLIDING DOOR, PANIC.  The GM part number for the remote is 10335587.  We test the remote on a keyless entry tester to make sure it is sending proper signals before we send it to you.

 


Programming Procedure:

 

1. Remove the ignition key from the ignition lock cylinder.
2. Remove the “BCM PRGRM” fuse from the fuse panel, accessed by opening the front passenger door. Use the legend on the fuse panel to properly locate the “BCMPRGRM” fuse.
3. Close all of the doors.
4. Close the liftgate.
5. Insert keys into the ignition, and turn the ignition lock cylinder to ACC (one click towards you - the opposite direction from starting the engine).
6. Turn the ignition lock cylinder to OFF, and then back to ACC within 1 second.
7. Open and close any vehicle door. A chime will be heard when the system enters the programming mode.
8. Press and hold the transmitter LOCK and UNLOCK buttons simultaneously for 14 seconds. IMPORTANT: After 7 seconds, a chime may be heard confirming successful synchronization. It is necessary to wait approximately 14 seconds for a
second chime that will confirm successful programming. Your new remote has been accepted and all existing remote codes have been erased.
9. Repeat the previous step on each additional transmitter to be programmed (including any existing transmitters).
10. Remove the ignition key from the ignition lock cylinder.
11. Install the “BCM PRGRM” fuse back into the fuse panel.

 


The following vehicles can use this remote when equipped with the factory keyless entry system:

Chevrolet Venture (2001-2005), Oldsmobile Silhouette (2001-2004), Pontiac Montana (2001-2005).

 

Accessories
  • Battery Included
  • Free Tech Support
  • Guaranteed To Work
  • Tested Before Shipping
Return Policy

OVERVIEW

At RAK we make returns as easy as possible. Our mission is to provide you with the best products and the best service in the industry. We understand that sometimes, customers change their minds about products that they order or simply do not need them anymore. We also know that customers are cautious about Return Policies since they are often tricky and misleading. Our goal is to make the return or exchange process trustworthy and as simple as 1-2-3.

RETURN POLICY

If for any reason you are not completely satisfied with your purchase, you may return the item within 30 days of delivery of your order. The following rules apply:

Products must be in the same condition we sent it in.

Shipping Fees are non-refundable.

All returns must be made by signing in, going to MY ACCOUNT, clicking order history, finding the order, click Return this item.There are few non-returnable products & services that may be offered on our website. It will indicate clearly in the product description if a different return policy applies.

Order cancellations can only be requested prior to shipment.

RETURN PROCEDURE

To return a product, you must first request a Return Merchandise Authorization (RMA) that is located in the MY ACCOUNT section next to each order item that you want to return. Once you've selected the items to return and the reason, you will be given return instructions.

EXCHANGE PROCEDURE

There are 2 ways you can go about exchanging a product:

Option 1 (Slower) - Use the standard return procedure to request an RMA for the part you need exchanged. In your request please specify the exact item(s) you would like to exchange to. Upon receipt of your returned product we will process an exchange and ship the new part. If there is a difference in the price, you will be either refunded or charged the difference.

Option 2 (Faster) - Order the new part over the phone and request to include a prepaid label to send back the first purchase for refund.

DEFECTIVE, DAMAGED, OR INCORRECT PRODUCTS

We all know that accidents happen sometimes. If your product(s) will arrive defective, damaged, or simply incorrect, please contact our customer service department as soon as possible. Please do not attempt to use or install the part! We will send you a replacement part and provide you with a prepaid return label to return the defective part. Product(s) must be returned to us within 30 days. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier.

ORDER CANCELLATIONS

When you request a cancellation of an order or a part it may take up to 24 business hours to process your cancellation claim. This process may involve voiding orders in computer systems, removing items from backorder logs, having operations personnel pull items from production schedules and sometimes stopping orders at the shipping dock. Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of your cancellation.

REFUNDS & CREDITS

After we accept your return, you will be issued a refund via the same payment method as you had originally used to place the order. The refund amount will be composed of the original purchase price minus shipping charges. You will be sent an email confirming receipt of the return and your credit. Please allow an additional 5-7 days for the credit to appear on your account.

Battery Replacement

Remote Batteries

Bring your old key fob back to life.

Buy CR2032 Battery

To reaplace the battery:

  1. Insert a flat object like a coin into the slot on the side of the transmitter and twist it to separate the halves.
  2. Gently pry the battery out of the transmitter. Do not use the metal flanges to “pop out” the battery.
  3. Replace the battery.
  4. Reassemble the transmitter. Make sure the halves are snapped together tightly so water will not get in.
  5. Check the transmitter operation.

Note: Replacement of the battery will not cause the remote transmitter to become deprogrammed from your vehicle. The remote transmitter should operate normally after battery replacement.

Customer Reviews
Share your thoughts with other customers
Login to leave a review
Top Reviews
Very satisfied
by Merrill D on March 29, 2017
 
 
 
 
 

Came with everything and works just like the old one.

Was this review helpful to you? yes no
Remote
by James D on April 25, 2020
 
 
 
 
 
Verified Purchase

I purchased this new remote because my original remote did not work most of the time. I purchased the (L2C0007T) 5 Button remote it was easy to program and works great. The only thing the one they are showing is $29.95 I had to pay $88.95, not sure why the price difference.

Was this review helpful to you? yes no
Questions & Answers
Be first to ask a question

Get in Touch
  • Chipkeys
    2302 Ave U #79
    Brooklyn, NY 11229
  • 386.586.3650
  • CONTACT US
Get the Latest

SIGN UP TO HEAR ABOUT OUR NEW PRODUCTS AND SALES.

TEASoftware