KPU41846 Keyless Remote

Mazda Factory Keyless Remote FCC KPU41846 Model 41846

Tested Remote, Guaranteed To Work

This Item Is Currently Out Of Stock
Notify When Back In stock
Select Your Vehicle
Specifications
Item Specifics
Product Type
Regular Remote
Buttons
3
LED
None
Frequency
313 MHz
Remote Programming
Onboard
RF Transmission
1Way
Description

All vehicles using this remote are onboard programmable. Use the easy programming instructions to program your vehicle to accept remotes. Battery included.


Remote For Mazda:

Remotes are tested on keyless entry testers to ensure proper functioning.  This remote's FCC ID is KPU41846.   The model number is 41846.  It has LOCK, UNLOCK, and PANIC buttons.


Programming Procedure:

  • For 2004-2006 3.

1. Remove key from ignition
2. Close all doors.
3. Open driver’s door. Perform steps 4-6 within 24 seconds.
4. Turn ignition switch ON and back to LOCK position three times
5. Close and open driver’s door three times
6. Door locks should lock and unlock automatically (if they do not wait 40 seconds and repeat procedure starting at step 1.)
7. Press UNLOCK button of each keyless remote to be programmed twice, door locks should lock and unlock after each remote is programmed. (If door locks do not lock and unlock proceed as follows: Close and open driver’s door once, door should lock and unlock twice. If door locks do not lock and unlock, go back to step 3.)
8. Exit vehicle and test remote(s).


  • For 2004-2006 6.

1. Begin with keys out of ignition.
2. Close all doors.
3. Open driver side door and leave open.
4. Perform the following steps within 24 seconds:
a. Insert key in ignition
b. Turn key to On and Off
c. Repeat step b two more times
d. Remove key from ignition.
e. Push driver door frame button three times (black rubber button located on driver door frame that tells the vehicle whether of not door is closed, similar to your refrigerator door button)
5. The doors should automatically lock and unlock at this point signaling that the vehicle is now in programming mode. If not, wait 40 seconds and return to Step 4.
6. All transmitters need to be programmed at this time, including the old ones. Push any button on a transmitter two times. The door lock actuators should lock then unlock or a chime should sound at this point signaling that the vehicle has accepted the new transmitter code.
a. If there is only one transmitter, press any button on the same transmitter twice until the door lock actuators lock then unlock or a chime sounds. Repeat this step one last time with the same transmitter for a total of three programmings.
b. If there are two transmitters, press any button on the second transmitter twice until the door lock actuators lock then unlock or a chime sounds. Repeat this step one last time with the second transmitter for a total of three programmings.
c. If there are three transmitters, press any button on the second and third transmitters twice (one after another) until the door lock actuators lock then unlock or a chime has sounded for each of the three transmitters.
7. Close the door and test each remote. If one or more remote is not working, repeat the programming procedures.


The following vehicles can use this remote when equipped with the factory keyless entry system:

Mazda 3 (2004-2006), Mazda 6 (2004-2006).

Accessories
Application List
ImageSKU / Part NoApplicationDetailStockPriceAdd to Cart
6000A 6000AMazda 3 (2004-2006)--Call for Price
6000A 6000AMazda 6 (2004-2006)5 drs--Call for Price
Return Policy

OVERVIEW

At RAK we make returns as easy as possible. Our mission is to provide you with the best products and the best service in the industry. We understand that sometimes, customers change their minds about products that they order or simply do not need them anymore. We also know that customers are cautious about Return Policies since they are often tricky and misleading. Our goal is to make the return or exchange process trustworthy and as simple as 1-2-3.

RETURN POLICY

If for any reason you are not completely satisfied with your purchase, you may return the item within 30 days of delivery of your order. The following rules apply:

Products must be in the same condition we sent it in. If the condition isn't in the same condition that we sent to you, then the refund amount will be less due to our cost to restore or refurbish the item. If it's not possible to restore or refurbish then the refund would be the value we could sell it for in the condition it is now in minus 20%. If you place a "Special Order" with us then there would be a 40% restocking fee.

Shipping Fees are non-refundable.

All returns must be made by signing in, going to MY ACCOUNT, clicking order history, finding the order, click Return this item.There are few non-returnable products & services that may be offered on our website. It will indicate clearly in the product description if a different return policy applies.

Order cancellations can only be requested prior to shipment.

RETURN PROCEDURE

To return a product, you must first request a Return Merchandise Authorization (RMA) that is located in the MY ACCOUNT section next to each order item that you want to return. Once you've selected the items to return and the reason, you will be given return instructions.

EXCHANGE PROCEDURE

There are 2 ways you can go about exchanging a product:

Option 1 (Slower) - Use the standard return procedure to request an RMA for the part you need exchanged. In your request please specify the exact item(s) you would like to exchange to. Upon receipt of your returned product we will process an exchange and ship the new part. If there is a difference in the price, you will be either refunded or charged the difference.

Option 2 (Faster) - Order the new part over the phone and request to include a prepaid label to send back the first purchase for refund.

DEFECTIVE, DAMAGED, OR INCORRECT PRODUCTS

We all know that accidents happen sometimes. If your product(s) will arrive defective, damaged, or simply incorrect, please contact our customer service department as soon as possible. Please do not attempt to use or install the part! We will send you a replacement part and provide you with a prepaid return label to return the defective part. Product(s) must be returned to us within 30 days. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier.

RISK OF LOSS

A tracking number is provided with every order you place. Once the carrier’s status shows the package has been delivered we are not responsible for replacement orders!

ORDER CANCELLATIONS

When you request a cancellation of an order or a part it may take up to 24 business hours to process your cancellation claim. This process may involve voiding orders in computer systems, removing items from backorder logs, having operations personnel pull items from production schedules and sometimes stopping orders at the shipping dock. Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of your cancellation.

REFUNDS & CREDITS

After we accept your return, you will be issued a refund via the same payment method as you had originally used to place the order. The refund amount will be composed of the original purchase price minus shipping charges. You will be sent an email confirming receipt of the return and your credit. Please allow an additional 5-7 days for the credit to appear on your account.

Battery Replacement

Remote Batteries

Bring your old key fob back to life.

Buy CR2025 Battery

To replace the battery:

  1. Insert a small screwdriver into the slot and gently pry open the transmitter.
  2. Press the portion of the battery indicated by A and remove the battery.
  3. Install a new battery (CR2025 or equivalent) into the front portion of the holder with the positive pole (+) facing up. Press on the B portion of the battery to set the battery.
  4. Align the front and back covers and snap the transmitter shut.

Note: Replacement of the battery will not cause the remote transmitter to become deprogrammed from your vehicle. The remote transmitter should operate normally after battery replacement.

Customer Reviews
Share your thoughts with other customers
Login to leave a review
Questions & Answers
Be first to ask a question