Chipkeys.com - Supplier to Mobile Automotive Locksmiths - Keys Fobs Equipment

Cadillac Version

Car Version

Truck-Van Version

Show Reviews

Buick Cadillac Chevy GMC Pontiac Factory Keyless Remote KOBLEAR1XT 4 Button

Tested Remote, Guaranteed To Work

$19.95

Select Your Vehicle

Specifications

Item Specifics

Product Type: Regular Remote

Buttons: 4

LED: None

Frequency: 315 MHz

Remote Programming: See Description

RF Transmission: 1Way

Description

Some vehicles that use KOBLUEAR1XT 4 Button remotes are onboard programmable and some are not. Some vehicles use KOBLEAR1XT remotes that have a #1 or 2 on the back. This is for seat memory. It is unimportant to get a #1 and #2 pair. The order they are programmed into the car determines which will act like #1 or #2, if the vehicle is even equipped with seat memory.

Remote For GMC Buick Chevrolet Cadillac Oldsmobile:

This remote works on many kinds of GM vehicles. The FCC ID of this keyfob remote transmitter is KOBLEAR1XT. GM made this remote with a few different button configurations under these part numbers: 25695954, 25695955, 25695966, 25695967, 15184352, 15184353, 15752330, 15043458, 10443537. These remotes are tested on a keyless entry tester before being shipped to you so we can be sure it is sending proper signals.

Programming Procedure:

For 2001-2005 DeVille, 2001-2002 Eldorado, 2001-2004 Seville, 2003-2006 Astro, 2003-2007 Express, 2001-2005 Malibu, 2003-2006 SSR, 2004-2005 Safari, 2003-2007 Savana, 2001-2004 Alero, 2001-2003 Aurora, 2001-2005 Bonneville, 2004 Grand Prix, Grand Am 2001-2005:

These vehicles aren't onboard programmable, meaning you should get a local automotive locksmith to program your vehicle to accept new remote(s).

For 2001-2003 Safari, 2001-2004 Jimmy, 2001-2005 Blazer, 2001-2002 Astro:

IMPORTANT: Before entering programming mode, have in possession all of the transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program the transmitters again.

1. Close all vehicle doors, windows closed, wait for dome light to go off.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10.Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11.Repeat step 10 for each additional transmitter (including any existing transmitters).
12.Turn the ignition switch to the ON position in order to exit the transmitter programming mode.

For 2001-2004 Corvette:

1. Turn the ignition to ON.
2. Make sure the radio to OFF.
3. Press the RESET button in order to clear any warning messages on the instrument panel display.
4. Press and release the OPTIONS button on the DIC several times to scroll through the display options until the instrument panel is blank.
5. Press and hold the RESET button for 2 seconds.
6. FOB TRAINING message will be displayed. Press the RESET Button once. The message HOLD LK + UNLK 1ST FOB will be displayed.
7. Simultaneously press and hold the LOCK and UNLOCK buttons on the first remote for about 5 or more seconds. The IPC will indicate when the remote is programmed and when to proceed to next remote. Repeat this for all remotes you wish to use including existing remotes.
8. Remove the key.

For 2001-2005 Impala, 2001-2005 Monte Carlo:

1. Turn ignition switch to ON or ACC position and turn radio off. Press and hold the DISP button on radio for at least 5 seconds until SETTINGS is displayed. Using SEEK up or down arrow keys, scroll until FOB PROG appears on display. Press PREV or NEXT button to enter lower menu. Begin will be displayed.
2. Press DISP button to start programming. When PUSH FOB message flashes, press and hold LOCK and UNLOCK button on remote for 15 seconds. A chime will be heard to indicate remote has been learned.
3. Repeat step 2 for each remote including previously programmed remotes.
4. Scroll until EXIT appears in display. Press DISP button to exit programming mode. A chime will verify exit.

The following vehicles can use this remote when equipped with the factory keyless entry system:

Pontiac Grand Am (2001-2005), Buick LeSabre (2000-2005), Cadillac DeVille (2001-2005), Cadillac Eldorado (2001-2002), Cadillac Seville (2001-2004), Chevrolet Astro (2001-2005), Chevrolet Blazer (2001-2005), Chevrolet Corvette (2001-2004), Chevrolet Express 1500 (2003-2007), Chevrolet Express 2500 (2003-2007), Chevrolet Express 3500 (2003-2007), Chevrolet Impala (2001-2005), Chevrolet Malibu (2001-2005), Chevrolet Monte Carlo (2001-2005), Chevrolet SSR (2003-2006), GMC Jimmy (2001-2004), GMC Safari (2001-2005), GMC Savana 1500 (2003-2007), GMC Savana 2500 (2003-2007), GMC Savana 3500 (2003-2007), Oldsmobile Alero (2001-2004), Oldsmobile Aurora (2001-2003), Pontiac Bonneville (2001-2005), Pontiac Grand Prix (2004).

Accessories

Battery Included
Free Tech Support
Guaranteed To Work
Tested Before Shipping

Return Policy

OVERVIEW

At RAK we make returns as easy as possible. Our mission is to provide you with the best products and the best service in the industry. We understand that sometimes, customers change their minds about products that they order or simply do not need them anymore. We also know that customers are cautious about Return Policies since they are often tricky and misleading. Our goal is to make the return or exchange process trustworthy and as simple as 1-2-3.

RETURN POLICY

If for any reason you are not completely satisfied with your purchase, you may return the item within 30 days of delivery of your order. The following rules apply:

Products must be in the same condition we sent it in. If the condition isn't in the same condition that we sent to you, then the refund amount will be less due to our cost to restore or refurbish the item. If it's not possible to restore or refurbish then the refund would be the value we could sell it for in the condition it is now in minus 20%. If you place a "Special Order" with us then there would be a 40% restocking fee.

Shipping Fees are non-refundable.

All returns must be made by signing in, going to MY ACCOUNT, clicking order history, finding the order, click Return this item.There are few non-returnable products & services that may be offered on our website. It will indicate clearly in the product description if a different return policy applies.

Order cancellations can only be requested prior to shipment.

RETURN PROCEDURE

To return a product, you must first request a Return Merchandise Authorization (RMA) that is located in the MY ACCOUNT section next to each order item that you want to return. Once you've selected the items to return and the reason, you will be given return instructions.

EXCHANGE PROCEDURE

There are 2 ways you can go about exchanging a product:

Option 1 (Slower) - Use the standard return procedure to request an RMA for the part you need exchanged. In your request please specify the exact item(s) you would like to exchange to. Upon receipt of your returned product we will process an exchange and ship the new part. If there is a difference in the price, you will be either refunded or charged the difference.

Option 2 (Faster) - Order the new part over the phone and request to include a prepaid label to send back the first purchase for refund.

DEFECTIVE, DAMAGED, OR INCORRECT PRODUCTS

We all know that accidents happen sometimes. If your product(s) will arrive defective, damaged, or simply incorrect, please contact our customer service department as soon as possible. Please do not attempt to use or install the part! We will send you a replacement part and provide you with a prepaid return label to return the defective part. Product(s) must be returned to us within 30 days. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier.

ORDER CANCELLATIONS

When you request a cancellation of an order or a part it may take up to 24 business hours to process your cancellation claim. This process may involve voiding orders in computer systems, removing items from backorder logs, having operations personnel pull items from production schedules and sometimes stopping orders at the shipping dock. Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of your cancellation.

REFUNDS & CREDITS

After we accept your return, you will be issued a refund via the same payment method as you had originally used to place the order. The refund amount will be composed of the original purchase price minus shipping charges. You will be sent an email confirming receipt of the return and your credit. Please allow an additional 5-7 days for the credit to appear on your account.

Battery Replacement

Remote Batteries

Bring your old key fob back to life.

Buy CR2032 Battery

To replace the battery:

Use an object like a coin to pry open the transmitter.
Once the transmitter is separated, use an object like a pencil to remove the old battery. Do not use a metal object.
Remove and replace the battery, positive (+)side down.
Snap the transmitter back together tightly to be sure no moisture can enter.
Press and hold the lock and unlock buttons on the remote keyless entry transmitter for seven seconds to resynchronize the transmitter.
Check the operation of the transmitter.

Note: Replacement of the battery will not cause the remote transmitter to become deprogrammed from your vehicle. The remote transmitter should operate normally after battery replacement.