New Replacement BMW Subaru Remote 88036-AE060 88035-AC231 88036-XA010 A269ZUA111Programming: Onboard Programmable
All vehicles that use this remote are onboard programmable, meaning you can program the vehicle to accept new remotes yourself without any special tools or knowledge. Free phone tech support is available if needed. Remote for Subaru and BMW: This remote features 2 buttons. This will work for your vehicle when equpped with factory ...

New Replacement BMW Subaru Remote 88036-AE060 88035-AC231 88036-XA010 A269ZUA111

Programming: Onboard Programmable

Select Your Vehicle
Item Specifics
Product Type
Regular Remote
Product Character
Vehicle Specific
Remote Programming
RF Transmission
1 month

All vehicles that use this remote are onboard programmable, meaning you can program the vehicle to accept new remotes yourself without any special tools or knowledge. Free phone tech support is available if needed.

Remote for Subaru and BMW:

This remote features 2 buttons. This will work for your vehicle when equpped with factory keyless entry system. It has an FCC ID: A269ZUA111 and Part numbers: 88036-AE060, 88035-AC231, 88036-XA010.

Programming Procedure:

  • For 1996-2000 BMW Z3, 1998-1999 BMW M Roadster, 1996-1997 BMW M Coupe, 1996-1999 BMW 328IS, 1996-2000 BMW 328I, 1996-2000 BMW 325I, 1998-2000 BMW 323IS, 1998-2000 BMW 323I, 2000 BMW 323CI, 1996-1999 BMW 318TI, 1996-1997 BMW 318IS and 1996-1998 BMW 318I.

1. Step out of the vehicle. Make sure all the doors, trunk, and hood are closed. The security system must be in the disarmed condition. The key should not be in the ignition. Perform step 2-4 within 45 seconds.
2. Open the trunk and leave it open.
3. Open the driver door and sit in driver seat.
4. Close driver door.
5. Cycle the ignition 5 times within 10 seconds between OFF and ON (as far as it goes without cranking engine). The red security LED will light up and the siren will chirp once to indicate programming mode has been engaged.
6. Open the driver door and remain seated in the driver seat.
7. Close the driver door.
8. Press and release any button on the remote you want to program. The LED will shut off momentarily to indicate that the remote has been learned.
9. Repeat steps 6 to 8 to program additional remotes including your old remotes.
10. Open the driver door and exit the vehicle, leaving the door open.
11. Close the trunk.
12. Close the driver door. The LED will turn off and the siren will chirp twice.

  • For 1999-2004 Subaru Legacy/Outback, 2001-2004 Subaru Impreza, 2001-2004 Subaru Forester and 2003-2006 Subaru Baja.

Note: Perform steps 1-4 within 45 seconds.
1. Sit in the driver?? seat and close all doors, rear gate and trunk lid.
2. Open the driver?? door.
3. Close the door.
4. Insert keys in ignition. Turn the ignition switch from LOCK to ON (as far as you can go without cranking the engine) ten times in rapid succession (within 15 seconds), ending in LOCK. The horn chirps once to indicate that the system has entered programming mode.
5. Open the driver?? door.
6. Close the driver?? door
7. Press any button on the transmitter you wish to program top the system. The horn will chirp two times to indicate that the transmitter has been programmed.
8. Any additional transmitters can also be programmed at this time (including your old ones.) Repeat steps 5 through 7 for each additional transmitter.
9. Remove the ignition key from the ignition switch. The horn will chirp three times to indicate system is out of programming mode.

  • Battery Included
  • Free Tech Support
  • Guaranteed To Work
  • Tested Before Shipping
Return Policy


At RAK we make returns as easy as possible. Our mission is to provide you with the best products and the best service in the industry. We understand that sometimes, customers change their minds about products that they order or simply do not need them anymore. We also know that customers are cautious about Return Policies since they are often tricky and misleading. Our goal is to make the return or exchange process trustworthy and as simple as 1-2-3.


If for any reason you are not completely satisfied with your purchase, you may return the item within 30 days of delivery of your order. The following rules apply:

Products must be in the same condition we sent it in. If the condition isn't in the same condition that we sent to you, then the refund amount will be less due to our cost to restore or refurbish the item. If it's not possible to restore or refurbish then the refund would be the value we could sell it for in the condition it is now in minus 20%. If you place a "Special Order" with us then there would be a 40% restocking fee.

Shipping Fees are non-refundable.

All returns must be made by signing in, going to MY ACCOUNT, clicking order history, finding the order, click Return this item.There are few non-returnable products & services that may be offered on our website. It will indicate clearly in the product description if a different return policy applies.

Order cancellations can only be requested prior to shipment.


To return a product, you must first request a Return Merchandise Authorization (RMA) that is located in the MY ACCOUNT section next to each order item that you want to return. Once you've selected the items to return and the reason, you will be given return instructions.


There are 2 ways you can go about exchanging a product:

Option 1 (Slower) - Use the standard return procedure to request an RMA for the part you need exchanged. In your request please specify the exact item(s) you would like to exchange to. Upon receipt of your returned product we will process an exchange and ship the new part. If there is a difference in the price, you will be either refunded or charged the difference.

Option 2 (Faster) - Order the new part over the phone and request to include a prepaid label to send back the first purchase for refund.


We all know that accidents happen sometimes. If your product(s) will arrive defective, damaged, or simply incorrect, please contact our customer service department as soon as possible. Please do not attempt to use or install the part! We will send you a replacement part and provide you with a prepaid return label to return the defective part. Product(s) must be returned to us within 30 days. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier.


A tracking number is provided with every order you place. Once the carrier’s status shows the package has been delivered we are not responsible for replacement orders!


When you request a cancellation of an order or a part it may take up to 24 business hours to process your cancellation claim. This process may involve voiding orders in computer systems, removing items from backorder logs, having operations personnel pull items from production schedules and sometimes stopping orders at the shipping dock. Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of your cancellation.


After we accept your return, you will be issued a refund via the same payment method as you had originally used to place the order. The refund amount will be composed of the original purchase price minus shipping charges. You will be sent an email confirming receipt of the return and your credit. Please allow an additional 5-7 days for the credit to appear on your account.

Customer Reviews
Share your thoughts with other customers
Login to leave a review
Questions & Answers
Be first to ask a question

Get in Touch
  • Chipkeys
    2302 Ave U #79
    Brooklyn, NY 11229
  • 386.586.3650
Get the Latest