$$29.95Factory Remotes and Keys \ Regular Remote \ Toyota4211E
Replacement Toyota Dealer Installed Remote FCC ID: BAB237131-022Programming: Onboard
1990-1997 Toyota vehicles with the RS-3000 VIP systems use this remote.  This is a replacement for Toyota Part Number 08191-00870 and FCC ID BAB237131-022 with Black case (not grey case).  Toyota later discontinued the original part number and made PT398-07100 which has an FCC ID of BAB237131-056.  Remote is tested on a keyless ...
Key-N-Fob MfgBAB237131-022

Replacement Toyota Dealer Installed Remote FCC ID: BAB237131-022

Programming: Onboard

$29.95 Original Price: $64.95 54% off

Item #: 4211E

Add to Cart
Add to Wishlist
  • Create a New List
Item #

1990-1997 Toyota vehicles with the RS-3000 VIP systems use this remote.  This is a replacement for Toyota Part Number 08191-00870 and FCC ID BAB237131-022 with Black case (not grey case).  Toyota later discontinued the original part number and made PT398-07100 which has an FCC ID of BAB237131-056.  Remote is tested on a keyless entry tester for radio signal strength, battery strength, and proper functioning before shipping to you.  This remote transmits at 304MHz.  The top button is used for one vehicle and the bottom vehicle is used for another if you have two vehicles with the VIP system.

Works on these vehicles when equipped with dealership installed system rather than factory installed system:
1990-1997 Toyota 4Runner
1995-1997 Toyota Avalon (w/Dealer installed)
1990-1996 Toyota Camry
1997 Toyota Camry (w/Dealer installed)
1990-1997 Toyota Celica
1990-1997 Toyota Cotolla
1991-1997 Toyota Land Cruiser
1991-1995 Toyota MR2
1992-1997 Toyota Paseo
1993-1995 Toyota Pickup
1991-1997 Toyota Previa
1996-1997 Toyota Rav-4
1991-1997 Toyota Supra
1993-1997 Toyota T100
1995-1997 Toyota Tacoma
1993-1997 Toyota Tercel


To add new remotes and delete lost remotes:

1.     Insert the key into the ignition, and turn it to the ON position (as far as you can go without cranking the engine).

2.     Press and hold the receiver PROGRAMMING SWITCH/BUTTON for 3 seconds.  In some cases the button cannot be accessed with a finger - use a pencil or similar narrow object to poke through the Programming Button access hole.  For most vehicles, the receiver is located underneath either the driver or passenger front seats.  On others it is behind the driver’s dash. In the case of some Camry’s, the receiver can be accessed by gently prying out the black faceplate behind the mirror control switch.  The black faceplate is approx. 5 inches wide by 3 inches tall.

3.     The STATUS MONITOR LED (on dash or center console) turns on for 5 seconds.   For some vehicles, a double chirp of the horn is heard instead of the flashing light.

4.     Within 5 seconds of lighting the status MONITOR LED, press and release the transmitter’s TOP or BOTTOM button (either button on your REMOTE CONTROL can be programmed to operate the system - the other button can be programmed to operate a second Toyota vehicle with the same system).

5.     The STATUS MONITOR LED turns off, the Piezo chirper chirps once, and the exterior lights flash once.  In some cases, the only response is a single horn chirp.

6.     To program an additional remote, repeat steps 2-4.

7.     Turn OFF the ignition.

If you can’t find the receiver, view the most common locations a Toyota technician might install it:

Return Policy


At RAK we make returns as easy as possible. Our mission is to provide you with the best products and the best service in the industry. We understand that sometimes, customers change their minds about products that they order or simply do not need them anymore. We also know that customers are cautious about Return Policies since they are often tricky and misleading. Our goal is to make the return or exchange process trustworthy and as simple as 1-2-3.


If for any reason you are not completely satisfied with your purchase, you may return the item within 30 days of delivery of your order. The following rules apply:

Products must be in the same condition we sent it in. If the condition isn't in the same condition that we sent to you, then the refund amount will be less due to our cost to restore or refurbish the item. If it's not possible to restore or refurbish then the refund would be the value we could sell it for in the condition it is now in minus 20%. If you place a "Special Order" with us then there would be a 40% restocking fee.

Shipping Fees are non-refundable.

All returns must be made by signing in, going to MY ACCOUNT, clicking order history, finding the order, click Return this item.There are few non-returnable products & services that may be offered on our website. It will indicate clearly in the product description if a different return policy applies.

Order cancellations can only be requested prior to shipment.


To return a product, you must first request a Return Merchandise Authorization (RMA) that is located in the MY ACCOUNT section next to each order item that you want to return. Once you've selected the items to return and the reason, you will be given return instructions.


There are 2 ways you can go about exchanging a product:

Option 1 (Slower) - Use the standard return procedure to request an RMA for the part you need exchanged. In your request please specify the exact item(s) you would like to exchange to. Upon receipt of your returned product we will process an exchange and ship the new part. If there is a difference in the price, you will be either refunded or charged the difference.

Option 2 (Faster) - Order the new part over the phone and request to include a prepaid label to send back the first purchase for refund.


We all know that accidents happen sometimes. If your product(s) will arrive defective, damaged, or simply incorrect, please contact our customer service department as soon as possible. Please do not attempt to use or install the part! We will send you a replacement part and provide you with a prepaid return label to return the defective part. Product(s) must be returned to us within 30 days. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier.


A tracking number is provided with every order you place. Once the carrier’s status shows the package has been delivered we are not responsible for replacement orders!


When you request a cancellation of an order or a part it may take up to 24 business hours to process your cancellation claim. This process may involve voiding orders in computer systems, removing items from backorder logs, having operations personnel pull items from production schedules and sometimes stopping orders at the shipping dock. Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of your cancellation.


After we accept your return, you will be issued a refund via the same payment method as you had originally used to place the order. The refund amount will be composed of the original purchase price minus shipping charges. You will be sent an email confirming receipt of the return and your credit. Please allow an additional 5-7 days for the credit to appear on your account.

Customer Reviews
Share your thoughts with other customers
Login to leave a review
Questions & Answers
Be first to ask a question

Get in Touch
  • Chipkeys
    2302 Ave U #79
    Brooklyn, NY 11229
  • 386.586.3650
Get the Latest