29.9529.951
Buick Oldsmobile Pontiac Factory Keyless Remote ABO0303T ABO0302TTested Remote, Guaranteed To Work
This remotes works on a bunch of years and models and they all get programmed the same way with one exception.  The one exception is the 1995 Buick Riviera. This one vehicle isn't onbaord programmable, meaning that scan tool programming is required. You can get this done by a local automotive locksmith. The programming instructions ...
Key-N-Fob Mfg25602667,68,69 Key Fob

Buick Oldsmobile Pontiac Factory Keyless Remote ABO0303T ABO0302T

Tested Remote, Guaranteed To Work

$29.95
Select Your Vehicle
Specifications
Item Specifics
Product Type
Regular Remote
Buttons
3
LED
None
Frequency
315 MHz
Remote Programming
See Description
RF Transmission
1Way
Description

This remotes works on a bunch of years and models and they all get programmed the same way with one exception.  The one exception is the 1995 Buick Riviera. This one vehicle isn't onbaord programmable, meaning that scan tool programming is required. You can get this done by a local automotive locksmith. The programming instructions are easy to follow and we have free tech support if needed.


Remote For Buick Oldsmobile Pontiac:

This is a replacement for the factory keyless entry remote. The remote is tested on keyless entry testers to ensure proper functioning before we send it to you. The original FCC IDs for this remote were ABO0302T and ABO0303T with three buttons. 


Programming Procedure:

For 1995 Riviera:

This vehicle is not onboard programmable which means you will need a an automotive locksmith to program the vehicle to accept the replacement remote or key or to cut a key. Please use an automotive locksmith rather than the dealer. You are
likely to get a better service for a more reasonable price.


For 1994-1995 Lesabre, 1994-1995 Park Avenue, 1995 Aurora, 1994-1995 Eighty Eight, 1994-1995 Ninety Eight, 1994-1995 Bonneville:

IMPORTANT: Before entering programming mode, have in possession all of the transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program the transmitters again.

1. Insert keys in ignition and leave in OFF position.
2. Locate the Data Line Connector (DLC) underneath the driver?? side dashboard. Use the figures below as a map for your DLC (they usually aren?? numbered) based on how your DLC is positioned. The view in the picture below is looking straight into the cavities of the DLC. Notice how the DLC is tapered on both ends: we will be working on the wider row of cavities (1 through 8 in the figure below).
3. Make sure there are metal contact pins in terminals 8 and 4 and connect the Data Line Connector (DLC) terminal 8 to terminal 4 with a suitable jumper wire (leave the jumper wire connected throughout the programming procedure). Make sure you know which terminals are 8 and 4. The vehicle will respond by cycling the locks (locking then unlocking doors) to signify entering of programming mode.
4. Press and hold both the LOCK and UNLOCK buttons together on the first transmitter to be programmed. After about 30 seconds, the vehicle will respond by cycling the locks (locking then unlocking doors). Release the buttons on the transmitter.
5. Within one minute, repeat step 4 on the remaining transmitters to be programmed.
6. Remove the jumper wire applied to the DLC (disconnect terminals 8 and 4).
7. Test transmitter(s) for function.


For 1991-1992 Park Avenue, 1992-1993 Eighty Eight, 1992 Ninety Eight:

1. Insert the key in ignition and leave in the OFF position.
2. Locate the Data Link Connector (DLC) under driver?? side dashboard. Use the figure below to find the A and G pins.
3. Connect pins A and G of the DLC with a suitable electric wire. Receiver will respond by locking and unlocking doors within 2 seconds.
4. Press the UNLOCK button on the first remote to be programmed. Vehicle will respond by locking and unlocking the doors.
5. Press UNLOCK button on second remote to be programmed. Vehicle will respond by locking and unlocking the doors.
6. Disconnect jumper wire between pins A and G.


For 1993 Ninety Eight and 1992-1993 Bonneville:

1. Locate the Data Link Connector underneath the driver side dashboard. Use the diagram to identify the pins.
2. Ground pin G of the DLC. The receiver will respond by locking and unlocking the doors within 2 seconds.
3. Press any button on the first remote to be programmed. The door locks will cycle again.
4. Repeat step 3 for an additional remote (if any). The door locks will cycle again.
5. Remove the ground applied to pin G.


For 1991 Ninety Eight:

1. Make sure ignition is in the OFF position.
2. Locate the programming connector behind the passenger side instrument panel (accessed by opening the glove box and looking to the top left side, where it is held in place by a clip). It is a plastic connector with two wires leading up to it. The connector is not plugged into anything. You will have to pull out the inner tray of the glove compartment to access the connector.
3. The programming connector has two terminals. Connect both terminals with a suitable jumper wire. The keyless entry module will cycle the door lock motors once. Make sure the jumper wire remains connected throughout the procedure.
4. Press the unlock button on the first remote. In response the keyless entry module will cycle the door lock motors again.
5. If a second remote is to be programmed (including your old one), press the unlock button on the second remote. Door locks cycle again.
6. Remove jumper wire.


The following vehicles can use this remote when equipped with the factory keyless entry system:

Buick LeSabre (1991-1993), Buick LeSabre (1994-1995), Buick Park Avenue (1991-1993), Buick Park Avenue (1994-1995), Buick Riviera (1995), Oldsmobile 88 (1992-1993), Oldsmobile 88 (1994-1995), Oldsmobile 98 (1991), Oldsmobile 98 (1992), Oldsmobile 98 (1993), Oldsmobile 98 (1994-1995), Oldsmobile Aurora (1995), Pontiac Bonneville (1992-1993), Pontiac Bonneville (1994-1995)

  • Battery Included
  • Free Tech Support
  • Guaranteed To Work
  • Tested Before Shipping
Return Policy

OVERVIEW

At RAK we make returns as easy as possible. Our mission is to provide you with the best products and the best service in the industry. We understand that sometimes, customers change their minds about products that they order or simply do not need them anymore. We also know that customers are cautious about Return Policies since they are often tricky and misleading. Our goal is to make the return or exchange process trustworthy and as simple as 1-2-3.

RETURN POLICY

If for any reason you are not completely satisfied with your purchase, you may return the item within 30 days of delivery of your order. The following rules apply:

Products must be in the same condition we sent it in.

Shipping Fees are non-refundable.

All returns must be made by signing in, going to MY ACCOUNT, clicking order history, finding the order, click Return this item.There are few non-returnable products & services that may be offered on our website. It will indicate clearly in the product description if a different return policy applies.

Order cancellations can only be requested prior to shipment.

RETURN PROCEDURE

To return a product, you must first request a Return Merchandise Authorization (RMA) that is located in the MY ACCOUNT section next to each order item that you want to return. Once you've selected the items to return and the reason, you will be given return instructions.

EXCHANGE PROCEDURE

There are 2 ways you can go about exchanging a product:

Option 1 (Slower) - Use the standard return procedure to request an RMA for the part you need exchanged. In your request please specify the exact item(s) you would like to exchange to. Upon receipt of your returned product we will process an exchange and ship the new part. If there is a difference in the price, you will be either refunded or charged the difference.

Option 2 (Faster) - Order the new part over the phone and request to include a prepaid label to send back the first purchase for refund.

DEFECTIVE, DAMAGED, OR INCORRECT PRODUCTS

We all know that accidents happen sometimes. If your product(s) will arrive defective, damaged, or simply incorrect, please contact our customer service department as soon as possible. Please do not attempt to use or install the part! We will send you a replacement part and provide you with a prepaid return label to return the defective part. Product(s) must be returned to us within 30 days. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier.

ORDER CANCELLATIONS

When you request a cancellation of an order or a part it may take up to 24 business hours to process your cancellation claim. This process may involve voiding orders in computer systems, removing items from backorder logs, having operations personnel pull items from production schedules and sometimes stopping orders at the shipping dock. Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of your cancellation.

REFUNDS & CREDITS

After we accept your return, you will be issued a refund via the same payment method as you had originally used to place the order. The refund amount will be composed of the original purchase price minus shipping charges. You will be sent an email confirming receipt of the return and your credit. Please allow an additional 5-7 days for the credit to appear on your account.

Customer Reviews
Share your thoughts with other customers
Login to leave a review
Questions & Answers
Be first to ask a question

Get in Touch
  • Chipkeys
    2302 Ave U #79
    Brooklyn, NY 11229
  • 386.586.3650
  • CONTACT US
Get the Latest

SIGN UP TO HEAR ABOUT OUR NEW PRODUCTS AND SALES.

TEASoftware